REC PSU is a polysulfone, which is a high-temperature polymer of sulfone. It has excellent thermal and chemical resistance, which makes it possible to use it in complex areas: automotive, aerospace, electronics, defense, food, industrial, plumbing, medical.
The material has excellent thermal properties, which provides higher strength and rigidity at elevated temperatures;
Excellent hydrolytic stability;
High resistance to cracking when exposed to the environment;
High resistance to gamma radiation;
Resists the most common automotive fluids, including gasoline, antifreeze, transmission fluid, engine oil, power steering fluid, windshield washer fluid;
Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion);
High reproducibility of part sizes;
To print the material, it is necessary to have an all-metal extruder and a closed thermal chamber at the 3D printer.
To increase the adhesion, a perfostol or polyethyrimid film is needed.
Before printing be sure to dry the plastic.
The material has excellent thermal properties, which provides higher strength and rigidity at elevated temperatures;
Excellent hydrolytic stability;
High resistance to cracking when exposed to the environment;
High resistance to gamma radiation;
Resists the most common automotive fluids, including gasoline, antifreeze, transmission fluid, engine oil, power steering fluid, windshield washer fluid;
Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion);
High reproducibility of part sizes;
To print the material, it is necessary to have an all-metal extruder and a closed thermal chamber at the 3D printer.
To increase the adhesion, a perfostol or polyethyrimid film is needed.
Before printing be sure to dry the plastic.
| Print Settings | |
| Nozzle temperature | 350-380°C |
| Table temperature | 140-160°C |
| Blowing | not recommended |
| Min. nozzle diameter | 0.4 mm |
- Общие характеристики
Механические характеристикиПлотность 1,24 г/см3 Температура эксплуатации от -70°С до +172°С Температура размягчения ~ 180°C Страна производитель Россия
Транспортные характеристикиУдарная вязкость по Изоду 69 кДж/м2 Прочность при растяжении вдоль слоев н/д Модуль упругости при растяжении вдоль слоев н/д Прочность на изгиб 8.1 МПа Модуль упругости на изгиб н/д Максимальная нагрузка на изгиб н/д Прочность при растяжении поперек слоев н/д Модуль упругости при растяжении поперек слоев н/д Максимальная нагрузка на растяжение н/д Прочность на сжатие н/д Модуль упругости на сжатие н/д Максимальная нагрузка на сжатие н/д Коэффициент удлинения 50-100% Биоразлагаемость н/д Диэлектрическая проницаемость н/д Предел текучести при растяжени и при температуре 23°С 75 МПа Прочность при изгибе 2,8 мм/мин. 23°C н/д Твердость по Шору (шкала D) н/д Масло-бензостойкость (максимальное изменение формы за 24 часа) н/д Кислородный индекс, %O2 по ГОСТ 21793-76 30 Массовая доля золы по ГОСТ 15973 н/д Габариты упаковки 210х225х70 мм Вес нетто 500 грамм Вес брутто 0.85 кг
