REC PEEL-polyesteresterketone is one of the most highly effective polymers in the world. PEEK has exceptional properties of mechanical, thermal and chemical resistance, which makes it a suitable material for most places where other plastics simply will not cope.
The material has excellent thermal properties, which provides higher strength and rigidity at elevated temperatures;
Excellent hydrolytic stability;
High resistance to cracking when exposed to the environment;
Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion);
To print the material, it is necessary to have an all-metal extruder and a closed thermal chamber at the 3D printer.
To increase the adhesion, a perfostol or polyethyrimid film is needed.
Before printing be sure to dry the plastic at a temperature of 120°C, >4 hours.
The material has excellent thermal properties, which provides higher strength and rigidity at elevated temperatures;
Excellent hydrolytic stability;
High resistance to cracking when exposed to the environment;
Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion);
To print the material, it is necessary to have an all-metal extruder and a closed thermal chamber at the 3D printer.
To increase the adhesion, a perfostol or polyethyrimid film is needed.
Before printing be sure to dry the plastic at a temperature of 120°C, >4 hours.
| Print Settings | |
| Nozzle temperature | 375-410°C |
| Table temperature | 130-145°C |
| Blowing | not recommended |
| Min. nozzle diameter | 0.4 mm |
- Общие характеристики
Механические характеристикиПлотность 1,3 г/см3 Температура эксплуатации от -70°С до +275°С Температура размягчения ~ 290°C Страна производитель Россия
Транспортные характеристикиУдарная вязкость по Изоду н/д Прочность при растяжении вдоль слоев н/д Модуль упругости при растяжении вдоль слоев н/д Прочность на изгиб 130 МПа Модуль упругости на изгиб н/д Максимальная нагрузка на изгиб н/д Прочность при растяжении поперек слоев н/д Модуль упругости при растяжении поперек слоев 4ГПа Максимальная нагрузка на растяжение н/д Прочность на сжатие 70МПа Модуль упругости на сжатие н/д Максимальная нагрузка на сжатие н/д Коэффициент удлинения 50-100% Биоразлагаемость н/д Диэлектрическая проницаемость 23кв/мм Предел текучести при растяжени и при температуре 23°С н/д Прочность при изгибе 2,8 мм/мин. 23°C н/д Твердость по Шору (шкала D) 84.5 Масло-бензостойкость (максимальное изменение формы за 24 часа) н/д Кислородный индекс, %O2 по ГОСТ 21793-76 н/д Массовая доля золы по ГОСТ 15973 н/д Габариты упаковки 210х225х70 мм Вес нетто 500 грамм Вес брутто 0.85 кг
