REC Biocide PETG - plastic based on PET-G with a biocidal additive in the form of nanoparticles distributed over a polymer matrix, so its disinfecting properties will be manifested throughout the printed model. It is perfect for any products, it is very easy for them to print, since its shrinkage is even less than that of dry PLA, and thanks to the high adhesion between the layers, even thin-walled models have impressive strength. This material is characterized by very high impact resistance and a wide temperature range of application (-40 ° C to +70 ° C). And the most important essence of the biocidal material is that its surface is self-disinfected. Antibacterial and antimicrobial properties are inherent in printed products. Absolutely any FDM 3D printer can print REC Biocide PETG material.
Biocidality - the property of the material to prevent the settlement and reproduction of bioorganisms on the surface and in its structure (bacteria, fungi, algae, mollusks, slugs, worms, etc.)
Biocidality - the property of the material to prevent the settlement and reproduction of bioorganisms on the surface and in its structure (bacteria, fungi, algae, mollusks, slugs, worms, etc.)
| Print Settings | |
| Nozzle temperature | 215-245°C |
| Table temperature | 60-80°C |
| Blowing | 20% |
| Min. nozzle diameter | 0.1 mm |
- Общие характеристики
Механические характеристикиПлотность 1,30 г/см3 Температура эксплуатации от -40°С до +70°С Температура размягчения ~ 80°C Страна производитель Россия
Транспортные характеристикиУдарная вязкость по Шарпи 4,17 кДж/м2 Прочность при растяжении вдоль слоев 36,5 МПа Модуль упругости при растяжении вдоль слоев 1,12 ГПа Прочность на изгиб 76,1 МПа Модуль упругости на изгиб 2,06 ГПа Максимальная нагрузка на изгиб 120 Н Прочность при растяжении поперек слоев 33,6 МПа Модуль упругости при растяжении поперек слоев 1,73 ГПа Максимальная нагрузка на растяжение 1485 Н Прочность на сжатие 51,7 МПа Модуль упругости на сжатие 1,81 ГПа Максимальная нагрузка на сжатие 6386 Н Коэффициент удлинения 2,41% Биоразлагаемость н/д Диэлектрическая проницаемость н/д Предел текучести при растяжени и при температуре 23°С 53 МПа Прочность при изгибе 2,8 мм/мин. 23°C 76,07 МПа Твердость по Шору (шкала D) 76 Масло-бензостойкость (максимальное изменение формы за 24 часа) н/д Кислородный индекс, %O2 по ГОСТ 21793-76 н/д Массовая доля золы по ГОСТ 15973 н/д Габариты упаковки 210х225х70 мм Вес нетто 750 грамм Вес брутто 1.1 кг
